Designed and Manufactured In Germany by Parker Hannifin for the Stauff Corporation, this is a durable instrument that has been assembled to measure & display the pressure of Oil, Water & Lubricants. N essential tool for any mechanic or owner of hydraulic machinery. Please select gauge range in drop box. It comes in a foam filled safe case along with a 2 m long flexible and durable test hose & test 20 adaptors as per below. There is also the option of a Female Cat test flat face fitting (see drop down box above).
These gauges fulfill the safety requirements of German Standards EN 837-1/S2. It can display pressure readouts in BAR, PSI, KPa, MPa, Kg/M2 MH2O (please see photos) & comes with instruction CD and a downloadable PDF file. This combination allows instant accurate pressure reading simply by attaching to standard test ports found on most hydraulic machinery, excavators, earth movers tractors etc.It is an important tool for heavy equipment owners and mechanics. This pressure test kit will give you a clear diagnosis of actual pressures and or potential problem areas on hydraulic valves, pumps or can be used anywhere in the hydraulic system. We are able to supply a variety of other hydraulic tee pieces & test adaptors at an extra cost, please message us your requirements. Photos embedded in top of this listing body, are NOT CURRENT UNIT. Lightweight with carry handle and locking latch.
Tough, easy to clean foam filled plastic case. Storage compartment for test hose.Digital pressure testing gauge choice of one of the standard digital pressure gauges listed below. 1 x -1 to 16 Bar or.
1 x 0 to 600 Bar digital gauge. Test hose 2 metres long with dust caps.Suitable for mineral oil based fluids. Working Pressure to 600 bar (8820 PSI). Test 20 x 1/4 BSPP. Test 20 x 3/8 BSP. Test 20 x 1/8 BSP. 1/2" Bspp x 1/8" Bspp reducing bush. 3/8" Bspp x 1/8" Bspp reducing bush. Test 20 x test 20 Joiner. Rubber boot to protect digital gauge. # Optional Cat test male flat face. Housing made of die-cast Zinc with TPE rubber protective covering Wetted parts: Stainless Steel 1.4404, NBR, ceramic Gaskets: NBR (Buna-N®), FPM (Viton®).
600 bar / -14.5... Diameter: 79 mm / 3.11 in Depth: 33 mm / 1.30 in Weight: 540 g / 1.19 Ibs. Text display 4 1/2-digit Size: 50 x 34 mm / 1.97 x 1.34 in Actual value display: 15 mm /. 59 in MIN-/MAX or FS display: 8 mm /. 31 in Units: bar, PSI, MPa, kPa, mbar Peak pressure measurement with 10 ms sampling rate Lighted measured value display.G1/4 made of 1.4404 Stainless Steel Vibration: IEC 60068-2-6 / 10... 500 Hz / 5 g Shock: IEC 60068-2-27 / 11 ms / 25 g Load cycles (106): 100. ±0,25 % FS typ. / ±0,5 % FS max. +50 °C / +14 °F...
+122 °F Media: -20 °C... +80 °C / -4 °F... +176 °F Storage: -20 °C... +60 °C / -4 °F... Please send us a message for any questions or special adaptor requests.IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT. If you are not satisfied, please let us know so we can make it right!
Please send us a message for any questions you may have. Out of Stock It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item.
If there is any additional documentation that must be included for export to your location please advise when placing order. The item "STAUFF DIGITAL PRESSURE TEST KIT 0-600 BAR (8820 PSI) 2M TEST HOSE PLASTIC CASE" is in sale since Wednesday, August 11, 2021.This item is in the category "Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery Parts & Accessories\Hydraulics".online" and is located in Gold Coast, QLD. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.