Quick Charge SCO Series On Board Battery Charger 24 Volt 40 Amp SB175 Grey. Output Voltage - Charging (V): 27.6 to 30.6. Max AC Current (A): 10. Output Voltage - Float (V): 27.12. Max DC Current (A): 40.
Dimensions (LxWxH - metric): 229 × 229 x 152. Dimensions (LxWxH - inches): 9.0 x 9.0 x 6. Now you don't have to change chargers if you change battery types. Quick Charge's 24V 40A SCO2440 On Board Select-A-Charge line is the last charger you'll ever need. Arrives with a two foot 3-prong 110VAC cord, and 6' DC cord with Grey SB175 connector lead. Max DC Amps is 40. The Quick Charge Select-A-Charge On Board chargers are compact for their power output, and can mount in any direction, on scissor lifts, floor scrubbers, standby generators, pallet jacks, electric vehicles, or anything that would benefit from an on-board battery charger. They are vibration resistant, and totally enclosed in a die cast enclosure. They are energy efficient, up to 25% more so than ferroresonant chargers. Best of all, they are made in the USA. Fits in Tight Spaces; Mounts in Any Direction. Charge Gel, AGM, and Wet Batteries.Charges Starting and Deep Cycle Batteries. Digitally Displays Percent of Charge.
No Moving Parts, and an Integral Design. Ok to Clean Vehicle w/ Pressure Washer.Near Bullet Proof: Tough Die Cast Enclosure. Switch from wet deep cycle, AGM, or starting batteries with the push of a button. You can also choose the type of gassing/absorption mode. If set to shut off mode, the baby sit feature recycles the charger if voltage drops too low. The digital readout shows percent of charge, and battery voltage, plus a tri color LED for a more informed charge cycle.
F1 - Float: Regulates voltage at 27.6 Volts. Best for starting batteries, and gel's. F2 - Gas & Timed Shut Off: Batteries are allowed to gas to a maximum of 30.6 Volts before shut off. F3 - Gas & Float: Batteries are allowed to gas to a maximum of 30.6 Volts before dropping into indefinite float of 27.12 Volts. F4 - AGM & Float: Includes absorption cycle to a maximum of 29.4 Volts before dropping into indefinite float of 27.12 Volts. F5 - Lithium Ion: Must be pre-programmed at the factory. Some of the 5 profiles have specific adjustments that can be programmed to fine-tune the charge profile to your specific brand of battery or usage profile. Applicable to most applications (d0 is the default setting). For frequent shallow discharging, or frequent recharging of batteries with very little discharge.For batteries requiring long gassing/absorption cycles. US Battery, and Full River are two brands that benefit from longer charge cycles.
R0 When set to the F2 profile, charge will terminate, and will not monitor the battery (r0 is the default setting). R1 When set to the F2 profile, charge will terminate, and the battery will be checked weekly, if the voltage falls to a predetermined level, the charger will recycle and bring the battery(s) back up. The product is new/used surplus.Some items are old stock, but new. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.